Today am going to take you through steps to recover corrupted SD card. Recovery sd card is one of the major problem most people are facing and that keep them wasting money every day in buying new ones.
Formatting a corrupted sd cards using the conventional method by inserting it into laptop and locate it through the file manager, might not be possible as a pop will show, card cannot format or incomplete format. But as you are taking your time to read this post, you are about to learn steps to recover corrupted sd card.
STEPS TO RECOVER CORRUPTED SD CARD
Formatting a corrupted sd cards using the conventional method by inserting it into laptop and locate it through the file manager, might not be possible as a pop will show, card cannot format or incomplete format. But as you are taking your time to read this post, you are about to learn steps to recover corrupted sd card.
STEPS TO RECOVER CORRUPTED SD CARD
- Go to search in your computer and type run to get the run window or press window key + R on your keyboard to get that.
- After getting the window, type cmd and press enter key to get the cmd window. The window will appear as above.
- Type diskpart on the window that appeared and press enter key and something like; DISKPART> will show on the window.
- After that, type list disk and press enter key to show the available disks on your system. The diskpart will show your computer local disk as disk 0 and it space and your sd card as disk 1 and it space.
- After that, type select disk 1 and press enter key to select the sd card. And it will show that disk 1 has been selected.
- After that, type clean and press enter key to clean the sd card. It will show that you have succeeded in cleaning the disk.
- After that, type create partition and press enter key. It will show you that you have succeeded in creating the specified partition.
- After that, type select partition and press enter key.
- After that, type format fs=fat32 and press enter key. It will show you the % of the formatting, if it reaches 100%, it will show you diskpart successfully formatted the volume.
- After all the processes, type exist and press enter key to leave the part and close the command window.
Congratulations your sd card is now new and ready for use in any of your eligible devices!!!
If you see this post helpful, kindly use the share buttons below to share it with your friends. Thanks!


Thanks for this
ReplyDeleteu are welcome
ReplyDelete